Welcome to OnTimePlumbers

If your boiler fails, drops pressure, begins to leak or does not heat your home or provide hot water, then you need a qualified engineer that can determine the issue and provide you with an explanation of what is required. OnTime Plumbers offers a boiler repair service in London for homes and businesses and is available 24 hours a day for emergency calls and have Gas Safe registered engineers.
OnTime Plumbers is a company based in London that has been in business since 2012, and have over 13 years of experience in plumbing and heating. It operates in Greater London and in Hertfordshire, Essex and Surrey and has its headquarters in Hainault. OnTime Plumbers promises an estimated arrival time of 45-60 minutes for emergency service, depending on the situation and availability.
If your boiler has broken down, give us a call on 08000 584799 or ask a plumber to come and assess your boiler.

Not all boiler issues render the decision to replace the boiler. A professional diagnosis will determine if it is a faulty component, pressure problem, control fault, heating-system issue or another fault that can be fixed.
OnTime Plumbers are boiler repair and heating London plumbers for both residential and commercial properties. Their services are boiler repair, boiler installation and boiler replacement, as well as central heating services.

Breakdowns in the boiler system can be a very serious issue, especially when they result in the loss of both heating and hot water.
OnTime Plumbers offers 7/24 plumbing and heating emergency services throughout London. The company claims the engineers are on call 24/7 and can be at the job site within about 45–60 minutes.
Emergency boiler repair might be necessary when:
Again, if you detect the odor of gas, don’t try to fix the appliance yourself. Adhere to the following gas-emergency safety procedure and hire a Gas Safe registered engineer for gas work.
Different symptoms can occur in boilers depending on the fault. Some problems are relatively simple, and others need to be tested or determined prior to diagnosis.
Boiler Not Working
If it won’t start, the problem could be with your boiler controls, ignition, pressure, electric power supply, thermostat or other internal parts. If a boiler has been shut down, it may start again after a reset, but if it has been shut down over and over, it should be professionally looked into instead of being constantly reset.
No Heating and Hot Water
If your boiler works but your radiators are cold or hot water is not working, the issue could be the boiler, controls or the overall central heating system.
OnTime Plumbers also offers central heating diagnostics and repair, which means that the engineer can view the boiler and heating system as a whole system, not just a boiler issue.
The pressure in the boiler decreases or falls
Low boiler pressure can have an influence on the functioning of a heating system. If the air keeps getting out after you top it off, the problem could be due to a leak or other problem and should be addressed.
Leaks, system components or other faults can be associated with a recurring pressure problem. The appropriate response will be informed by the findings of the inspection.
Leaking Boiler
Don’t ignore a boiler leak. Leaks can cause water damage to adjacent surfaces and can also signify a problem with a component or connection, depending on the location of the leak.
If it is determined that the water has accumulated around the boiler, turn off the water at an appropriate location and do not attempt to remove it from the boiler without professional help.
Boiler Making Strange Noises
Any unusual boiler or heating system sounds (banging, whistling, gurgling etc.) can mean that something is not working properly.
The fault is not identified by the sound. The engineer should evaluate the appliance, and decide if the cause is related to circulation, components, pressure, deposits or something else.
Boiler Error Codes
If an abnormal condition is detected, many modern boilers will show an error or fault code. The code can assist an engineer in determining what to start troubleshooting with, but simply replacing a component is not always the solution.
When contacting OnTime Plumbers, ensure you let the engineer know the boiler model and error code when the boiler is displaying an error code.
Pilot Light, Ignition or Heating Control Problems
An ignition, control or related fault may interfere with a boiler’s proper functioning. When the pilot light keeps going out or the boiler keeps trying to light and then shuts off, it’s best to have professional diagnosis.
Avoid self-service repair of gas components. Boilers that use gas should only be repaired by a Gas Safe engineer.
There is no single price for boiler repair in London. The final cost depends on the fault, boiler type and model, parts required, complexity of the repair and whether additional heating-system work is necessary.
Because OnTime Plumbers’ supplied business information does not provide a current fixed boiler-repair price, we do not publish an invented figure.
Factors that can affect boiler repair cost include:

Considering that the boiler is otherwise in reasonable condition and the fault can be safely and economically repaired, a repair may be considered.
Consider replacement if the appliance is very old, is continually failing, isn’t efficient, has a hard time finding parts or if the cost to repair it is high compared to the lifespan of the boiler.
The age of every boiler at which it automatically needs to be replaced is not universal. The choice should take into account the condition, repair history, availability of parts, efficiency, replacement reliability and replacement cost of the boiler.
When repair isn’t the logical choice, OnTime Plumbers offers boiler installation and boiler replacement services.

Gas Safe Registered Engineers
OnTime Plumbers’ engineers are Gas Safe registered, a critical safety requirement for engineers who undertake gas work. Gas Safe registration ID for the business is 638777.
More Than 13 Years of Experience
Based in London, OnTime Plumbers has been operating for over 13 years in plumbing, boilers and heating and claim to have a great deal of service experience in this field.
24/7 Emergency Call-Outs
Boiler failure can occur at the most inopportune times. OnTime Plumbers offer emergency call-out services, day and night service, throughout London including emergency boiler and heating services.
45–60 Minute Stated Arrival Time
The company’s web site promises that there’s a “30 minute to 45 minute” response time for emergency services. Actual arrival may vary due to traffic, location, demand and availability.
Fully Insured and Licensed
When hiring a plumbing service for a residential or commercial property, OnTime Plumbers guarantees its plumbing business is completely insured and licensed, giving you added peace of mind.
City & Guilds Qualified
The company also has City & Guilds Qualified business trust information.
Real Customer Feedback
As of the time of the provided web content, OnTime Plumbers has a rating of 5.0 with 210 reviews on Google. It has been published reviews that contain feedback directly to boiler repairs and heating issues, such as customers giving an engineer a job of diagnosing and fixing boiler faults.

OnTime Plumbers is located at Office 14A, 11–17 Fowler Road, Hainault, IG6 3UJ and operate in Greater London, Hertfordshire, Essex and Surrey.
The coverage for its London services includes residential properties and commercial properties as well, and emergency plumbing and heating services are available 24 hours a day.
The value of local knowledge may be high for customers in London, as homes are not all the same, ranging from new flats and housing developments to older houses or bungalows with existing heating systems. An assessment should be carried out taking into account the individual boiler, controls and wider heating installation.
OnTime Plumbers provides 24/7 emergency call-outs across London and states an approximate 45–60 minute arrival time. Actual arrival depends on location, traffic, demand and engineer availability.
A complete breakdown does not automatically mean the boiler needs replacing. An engineer should assess the appliance, identify the fault and determine whether a safe and practical repair is possible.
If boiler pressure is repeatedly falling, the underlying cause should be investigated rather than repeatedly topping it up without understanding why. Contact a qualified heating engineer for an assessment.
Yes, boiler leaks can be assessed as part of a boiler repair call-out. The source of the leak needs to be identified before deciding on the appropriate repair.
Yes, an error code can help with diagnosis. Give the engineer the exact code and boiler model when booking so they have useful information before attending.
OnTime Plumbers provides both boiler repair and boiler installation/replacement services. Where repair is possible, the fault can be assessed before discussing whether repair or replacement is the more sensible option.
Gas boiler repairs should not be attempted as DIY work. Gas-related work must be carried out by an appropriately registered professional. OnTime Plumbers states that its engineers are Gas Safe registered.
There is no universal repair price. The cost depends on the fault, boiler, parts and complexity of the work. OnTime Plumbers’ current boiler repair pricing is not provided in the available business information.

Boiler problems can cause you to have no heating or hot water, and can be more troublesome if the issue is left unattended. OnTime Plumbers offer 24/7 boiler repair in London and they have Gas Safe registered engineers, and they guarantee that they will arrive within 45–60 minutes when you call them an emergency.
If the boiler has any of the following issues, it is likely time to have OnTime Plumbers assess the issue: leakage, pressure concerns, heating issues or boiler failures, breakdown.
To check your boiler repair in London, call 08000 584799 or request a plumber online to discuss it.