Project Overview OnTime Plumbers London recently completed a full kitchen sink and tap installation in RH10, paired with a complete replacement of the property’s existing water supply and waste pipework. Rather than simply fitting a new sink onto old, worn plumbing, our plumbing team addressed the root cause of the property’s poor water flow — […]

Project Overview

OnTime Plumbers London recently completed a full kitchen sink and tap installation in RH10, paired with a complete replacement of the property’s existing water supply and waste pipework. Rather than simply fitting a new sink onto old, worn plumbing, our plumbing team addressed the root cause of the property’s poor water flow — giving the customer a genuinely long-term fix rather than a cosmetic upgrade.

Kitchen sink and tap installations are one of the most common jobs we carry out, but they’re also one where cutting corners on the pipework causes the most repeat problems. This RH10 project is a good example of doing the job properly the first time.

The Problem: Old Pipework Causing Poor Water Flow

The property in RH10 had old and deteriorating pipework beneath the kitchen sink, which was restricting water flow and increasing the risk of leaks developing over time. The customer wanted more than a straightforward like-for-like swap — they asked for a new kitchen sink and tap along with an upgrade to the plumbing behind it, so the new fittings wouldn’t be let down by ageing pipework.

This is a common and sensible request. Fitting a new sink and tap onto old, corroded, or undersized pipework often means:

  • Continued poor or inconsistent water pressure
  • A higher risk of leaks at old joints and connections
  • The need for a follow-up repair sooner rather than later
  • Wasted cost, since the new fittings can’t perform to their full standard

What Our Engineers Did

Our team carried out a complete, methodical replacement covering both the visible fittings and the pipework behind them:

  • Removed the old kitchen sink, tap, and outdated pipework in full
  • Installed a new kitchen sink and modern tap, fitted to the customer’s specification
  • Replaced all water supply and waste pipework, rather than working around the old system
  • Secured all fittings and connections to current standards
  • Tested the system thoroughly to confirm leak-free operation and proper drainage before finishing the job

Replacing the pipework alongside the sink and tap meant the customer wasn’t just getting new fittings — they were getting a plumbing setup built to perform reliably for years, not just look good on day one.

The Result

The kitchen now has a fully functional sink and tap, backed by brand-new pipework delivering smooth, consistent water flow and reliable drainage. The customer was very pleased with the clean, professional installation and the noticeable improvement in water pressure compared to the old setup.

Why Pipework Matters as Much as the Fittings

A shiny new tap can’t make up for pipework that’s restricting flow or close to failing. When we’re asked to install a new kitchen sink or tap, we always check the condition of the existing pipework first — because fitting new hardware onto compromised pipes is a false economy that usually leads to a second call-out down the line.

Signs it’s worth upgrading pipework alongside a sink or tap installation include:

  • Weak or inconsistent water pressure at the kitchen tap
  • Visible corrosion, staining, or old fittings under the sink
  • Previous leaks or repairs in the same area
  • Pipework that predates the rest of the property’s plumbing

Trusted Kitchen Plumbing Installations

This kitchen sink and tap installation in RH10 reflects the standard we bring to every fitting job, whether it’s a straightforward tap swap or a full pipework upgrade:

  • Kitchen sink installation and tap replacement to a high standard
  • Full pipework upgrades where old plumbing is limiting performance
  • Careful, tidy workmanship with thorough leak testing before completion
  • Reliable service across London and the surrounding areas

Take a look at more of our completed work on our projects page, including jobs like our hot water cylinder 2-port valve replacement in E1 and toilet filling valve replacement in WD17.

Need a Kitchen Sink or Tap Installed?

If you need kitchen sink installation, tap replacement, or pipework upgrades, contact OnTime Plumbers London for fast, reliable, and professional plumbing services.

Call now on 08000 584799 — Gas Safe registered, with a typical 45–60 minute response time for emergency call-outs across London, Hertfordshire, Essex, and Surrey.

ACTIVE NOW
|
⚡ 45-60 MIN ARRIVAL
|
★★★★★ TOP RATED
ACTIVE NOW: 45-60 MIN ARRIVAL
08000 584799 WHATSAPP